Turning On The 2100 Bioanalyzer Instrument - Agilent 2100 Bioanalyzer Manual Del Usuario

5
Starting the 2100 Bioanalyzer Instrument

Turning on the 2100 Bioanalyzer Instrument

Turning on the 2100 Bioanalyzer Instrument
1 Turn on your Agilent 2100 Bioanalyzer instrument. The power switch is
2 The status indicator lamp will light green if power is present and all
3 Once your instrument has passed the self-tests, it is ready to run samples.
4 Start your PC by pushing the appropriate power buttons as outlined in the
82
located at the rear of the instrument, where the power cable plugs in (see
step 4 on page 80).
instrument self-tests have passed successfully.
If the status indicator lamp lights red, this indicates a hardware error. In
this case, please refer to the Troubleshooting section of the Agilent 2100
Bioanalyzer Maintenance and Troubleshooting Guide or the Online Help.
documentation.