Setting The Date And Time; Attaching The Wrist Cuff - IBP BP 131 Manual De Instrucciones

6 setting the date and time

Press the TIME key
1.
will flash for the month.
2. To enter the figures for the month, press the MEMORY RECALL key M until the number
of the month you require appears. To confirm, press the TIME key
3. Repeat stages 1 and 2 to enter day, hour and minute in succession.

7 attaching the wrist cuff

1. Wind the sleeve around the wrist The
display of the measuring unit must be on
the palm side of the wrist. The wrist must
be free.
Tighten the sleeve around the wrist. Do
2.
not pull forcefully on the sleeve. Do not
tighten the sleeve too much.
8
to enter date and time setting mode. Initially the input display area
again.
0,5 - 1 cm