The Memory Function 10 - IBP BP 131 Manual De Instrucciones

a) You can store your blood pressure reading up to 60 times (blood pressure and pulse) along
with the date and time in the memory. The measurement values are stored automatically.
Should 60 measurement values already be stored in the memory and a new value is added,
the oldest value is deleted.
To retrieve the stored values, press the MEMORY RECALL key M. The average value
b)
(AVG) is indicated in the display. If you press the MEMORY RECALL key M again, the
last measurement data stored will be displayed. Each further press of the MEMORY
RECALL key Mindicates in numerical order, from 1 to 60, the measurement
values previously obtained each time.
c)
If you press the TIME key
the facility to delete all the data stored. Switch off the unit and hold down the MEMORY
RECALL key M until the display shows "Clr.".
note:
The data in the memory will not be lost even when the Blood Pressure Monitor
is switched off. Replacing the batteries will not affect the memory.

the memory function 10

, the values stored will be displayed in reverse order. You have
11