Setting Up
1. Remove the device from the packaging.
2. Open the battery compartment e on the rear panel of the
device. For this press on the area with the two small bars and
slide the battery compartment cover r away from the device.
3. According to the positioning diagram in the battery compart-
ment e place 3 x 1.5 V Batteries, Type Mignon, size AA, into
the compartment e.
4. Close the battery compartment e.
using powerlux
1. move powerlux with the lens q over the text that is to be mag-
nified.
2. Powerlux has two SMD high performance LEDs for even illumi-
nating of the reading area. To switch on the built-in LED lighting
please press the button w.
After approx. 30 minutes the lighting switches off automati-
cally. If, after this time, you want to continue using the lighting
press the button w again to switch the lighting back on.
3. After approx. 30 minutes the lighting switches off automatically.
As a result of this, unnecessary depletion of the batteries will
be avoided if you forget to switch powerlux off after use.
If you use powerlux for less than 30 minutes you can switch
the lighting off by pressing the button w.
Care Instructions
Clean the housing with a moist cloth. Clean the lens q with a
soft, lint-free cloth (e.g. glasses cleaning cloth). In case of heavy
soiling (e.g. fingerprints), clean the lens q carefully with a damp
cloth.
7