Remote Controller - Samsung SMT-190D Serie Manual De Usuario

USER'S MANUAL USER'S MANUAL USER'S MANUAL USER'S MANUAL USER'S MANUAL USER'S MANUAL USER'S MANUAL

■ Remote Controller

Button
SCR. SAVE Allows users to set the monitor's SCREEN SAVE MODE.
0 ~ 9 Channel KEY/Number Key.
ID RESET The Remote ID is reset to 1.
SYSTEM ID setting. Press the SYSTEM ID KEY and the
SYSTEM ID
number keys to input the SET's ID. (Refer to SYSTEM ID. (Eng-))
M.SCREEN QUAD - A,QUAD - B, 9 split screens selection
VOLUME (+/-)
Increase and Decrease sound volume from the monitor.
PIP Picture In Picture.
ZOOM X screen in Single Channel.
FREEZE Allows users to see a target camera picture in the PAUSE MODE.
Displays menu items. Use this also to exit the sub menu and return to
MENU
the menu at the next highest level.
DVR/LCD Selects DVR mode or LCD MONITOR mode.
LIVE/P.B
LIVE/PB/TRIPLEX modes are converted in sequence
/TRIPLEX
SEARCH Search video/audio signals recorded in HDD.
▼, ▲, ,  directional keys.
key is used for Fast Forward during playback and Step Forward
▼, ▲, ,  during pause.
 key is used for Fast Reverse during playback and Step Reverse
during pause.
ENTER Use to select a menu item or to accept the changed value.
Plays back DVR recorded data. Temporarily stops during
playback.
Stops DVR playback or recording.
Records live video.
Lock STOP keys during recording to prevent accidental
operation of the unit.
PIP - Available in VGA Mode
VGA PIP
Push the PIP button to turn PIP screen On/Off.
Press to mute the sound temporarily. Displayed on the
bottom left of the screen. Press the MUTE button again to cancel the
MUTE
Mute function.Alternatively press the - or + button to cancel the Mute
function.
Available In VGA mode Only
AUTO
Adjusts the screen display automatically.
Press the 'SOURCE' button to change the input signal source. Changing
SOURCE the source is allowed only in external devices that are connected to the
monitor at the time. [DVR / VGA]
UNDER SCAN Displays the entire video signal on the screen.
Available in DVR Mode Only.
Press to select a pre-defined Picture Mode of the monitor or to change
the picture atmosphere as required. When you press this button, current
P.MODE mode is displayed on the lower center of the screen. The monitor has
four automatic picture settings that are preset at the factory.
Then push button again to circle through available
reconfigured modes. ( Dynamic, Standard, Movie, Custom )
Eng-17
Function