Bibby Scientific Techne SBL-1 Manual Del Operador página 26

8. For the SBL-2D the following table indicates the heat input required to maintain a range of temperatures,
with the energy regulator control:
Bath temperature
200°C (392°F)
300°C (572°F)
400°C (752°F)
500°C (932°F)
600°C (1112°F)
The fourth heater is only used as a 'boost' heater.
THE FOURTH HEATER IS NOT CONTROLLED BY THE ENERGY REGULATOR AND SHOULD BE
SWITCHED OFF WHEN CONTROLL TEMPERATURE IS REACHED.
Maximum temperature for this bath: 600°C (1112°F).
Energy
Regulator
heater Switches
LOW
LOW
MEDIUM
MEDIUM
HIGH
Heater
Selection
Switches
24
energy reg Setting
7 to 8
9 to 10
2 to 3
8 to 9
4 to 5
Heater
Selector
Switch