Technical Data; Ec Declaration Of Conformity - DeWalt D28415 Manual De Instrucciones

E N G L I S H
ANGLE GRINDER D28415
Congratulations!
You have chosen a D
E
experience, thorough product development and
innovation make D WALT one of the most reliable
E
partners for professional power tool users.

Technical data

Voltage
(U.K. & Ireland only)
Power input
No-load speed
Wheel diameter
Spindle
Weight
Fuses:
Europe 230 V tools
U.K. & Ireland 230 V tools
U.K. & Ireland 115 V tools
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of
non-observance of the instructions in this
manual.
Denotes risk of electric shock.
Fire hazard.
18
WALT tool. Years of
D28415
V 230
V 230/115
W 2,200
6,500
mm 230
M14
kg 4.8
10 Amperes, mains
13 Amperes, in plugs
16 Amperes, mains
EC-Declaration of conformity
D28415
D WALT declares that these power tools have been
E
designed in compliance with: 98/37/EEC,
89/336/EEC, 73/23/EEC, 86/188/EEC, EN 50144,
EN 55014-2, EN 55014-1, EN 61000-3-2 &
EN 61000-3-3.
For more information, please contact D
address below, or refer to the back of the manual.
Level of sound pressure:
L (sound pressure)
pA
L (acoustic power)
WA
K (sound pressure uncertainty)
pA
K (acoustic power uncertainty)
WA
Weighted root mean square acceleration value:
Measured according to EN 50144
Measured according to EN 60745
* measurement uncertainty according to EN 12096: 0.5 m/s
** measurement uncertainty according to EN 12096: 0.6 m/s
Director Engineering and Product Development
Horst Großmann
D WALT, Richard-Klinger-Straße 11
E
D-65510, Idstein, Germany
WALT at the
E
D28415
dB(A) 90.5
dB(A) 99.5
dB(A) 2.8
dB(A) 2.8
D28415
2
m/s 1.6*
2
m/s 2.1**
2
2