Intended Use; Description Of Parts - Parkside PKLL 8 A2 Traducción Del Manual De Instrucciones Original

Intended use

The product is suitable for the the determination and verification of
horizontal and vertical lines. The product is exclusively suitable for use
in enclosed operating sites. Any other use or modification of the product
shall be considered improper use and may result in serious accidents.
The manufacturer assumes no liability for damages due to improper
use. Not intended for commercial purposes.

Description of parts

H-button to switch on / off horizontal line
1
LED indicator (red: levelling off, green levelling on)
2
LOCK switch
3
V-button to switch on / off vertical line
4
Battery compartment
5
- Tripod thread (underneath)
6
Laser beam opening
7
- screw (to align with 1/4" tripod thread of cross line laser)
8
Metal key (to adjust 1/4" screw on the quick shoe)
9
Locking screw (to adjust the angle of tripod flat head to up
10
to 90 degree)
Bubble level
11
Lever (to fix the quick shoe)
1 1a
Long Handle
12
Locking screw (to rotate the tripod flat head up to 360 degree
13
horizontally)
Locking screw (to adjust the height of the centre column)
14
Plastic ring
15
Blocking lever (to adjust the height of the legs)
16
GB/IE 25