Ordering Replacement Parts - Axis Spin AX-2200 Manual De Instrucciones

the frame, then insert the new inner cutter assembly
back into the housing and lock in place by pushing
down and turning clockwise the screw knob located
in the center. Please make sure that the locating
hole (figure 10) is lined up with the pin as seen in
figure 9.
2. Please make sure that the floating head and inner
cutter assembly is secure before attaching floating
head and inner cutter assembly to shaver.
3. Always keep protective head guard attached
when shaver is not in use. This will assure that the
floating heads will not be damaged.
Axis Spin |2| English

Ordering replacement parts

Please contact Axis/BPI at 1-877-263-9500
to order replacement parts for your Axis shaver.
Please refer to the following part number.frame,
outer foil frame and inner blade.
Part Number: AS-1
Description: Replacement Rotary Heads and
Rotary Blades Assembly for AX-2200
> The above parts are available at the retailer from
whom your shaver was purchased.
Axis Spin |2| English