Wet Cleaning - Axis Spin AX-2200 Manual De Instrucciones

CLEANING YOUR SHAVER
Before cleaning, switch off the product by sliding the
switch downwards.

Wet cleaning

1. Slide the switch to off position
2. Remove the floating heads assembly by
holding the body in one hand and
pulling out the cutter assembly by
the other.
3. Switch on the product and wash
Axis Spin |1| English
the blades in cold or warm water.
4. After washing, switch off the product, wipe dry
with a soft cloth and leave it in an airy place until fully
dried.
5. Attach the floating heads assembly properly to the
body to ensure smooth operation.
Using the cleaning brush
1. Slide the switch to off position.
Remove the floating heads assembly by holding
the body in one hand and pulling out the cutter
fig.4
Axis Spin |1| English