Parts Identification - Sinbo SHC 4354 Manual De Instrucciones

ENGLISH
SINBO SHC 4354 RECHARGEABLE HAIR CLIPPER
OPERATING INSTRUCTIONS
Before using, please read the instructions carefully.
NOTES BEFORE USING
SHC 4354 is our newest product which is supplied for family use, and for professional hairdressers to
clip different hairstyles too. Comb attachments from 3mm to 15mm in total 9 positions:
3/4.5/6/7.5/9/10.5/12/13.5/15mm and 18/19.5/21/22.5/24/25.5/27/28.5/30mm.
Before using at the first time, please charge 8 hours fully to activate the inside rechargeable batteries.

PARTS IDENTIFICATION

1. Thinning out adjuster (push right and left), 2. Switch (push up and down), 3. Adjustment wheel
4. Indicator light, 5. Blade, 6. Comb attachment, 7. Adaptor, 8. Oil bottle, 9. Cleaning brush
How to use
This hair clipper can be used in both cord and cordless.
1. Put the adaptor connect with the jack of battery pack which lies at the bottom of the machine, then
put the adaptor pins connect with AC power pay attention to the voltage, please coincide with the voltage
on the nameplate of adaptor, the full charging time is 8 hours. When fully charged, it can be used
continuously for more than 45 minutes. During charging, the indicator light shows red.
2. Push the switch button from 1 to 0, then it can be used.
3. For thinning out , please push the thinning out adjuster from right to left.
How to use the comb attachment
When load and unload the comb attachment, please ensure the power switch to "0" position.
1. Please put the comb (long and sharp ends) into slots of clipper at the sides.
See picture :
2. Using the adjustment wheel to adjust the length of comb (push up for long, back up for short)
See picture :
- 6 -