Lenco CS-420 Manual De Instrucciones página 12

Ocultar thumbs Ver también para CS-420:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

This tablet is produced according to all current safety regulations. The following safety tips
should safeguard users against careless use and dangers involved with such use.
Although this device is manufactured with the utmost care and checked several times
before leaving the factory, it is still possible that problems may occur, as with all
electrical appliances. If you notice smoke, an excessive build-up of heat or any other
unexpected phenomena, you should disconnect the plug from the main power socket
immediately.
This device must be well ventilated at all time!
This device must operate on a power source as specified on the specification label. If
you are not sure of the type of power supply used in your home, consult your dealer or
local power company.
The socket outlet must be installed near the equipment and must be easily accessible.
Do not overload AC outlets or extension cords. Overloading can cause fire or electric
shock.
Keep away from rodents. Rodents enjoy biting on power cords.
Always hold the plug when pulling it out of the main supply socket. Do not pull the power
cord. This can cause a short circuit.
Avoid placing the device on any surfaces that may be subject to vibrations or shocks.
When the device is not in use for long periods, unplug the AC power cable for safety
reasons.
To clean the device, use a soft dry cloth. Do NOT use solvents or petrol based fluids. To
remove severe stains, you may use a damp cloth with dilute detergent.
The supplier is not responsible for damage or lost data caused by malfunction, misuse,
modification of the device or battery replacement.
11

Publicidad

Tabla de contenido
loading

Tabla de contenido