Sd Card Slot; Reset Button - Lenco CS-420 Manual De Instrucciones

16-21. PRESET STATION MEMORY AND TOP/>||, INT, RPT, RDM BUTTONS
1) In radio mode:
When pressed briefly, these buttons select a preset station directly. If one of the six buttons is pressed
for more than 2 seconds, the station currently being listened to is memorized into the memory bank of
the selected preset button.
2) In SD or USB mode:
(1)Press the TOP/>|| button briefly to pause the playback of the SD card or USB stick. Press again to
resume normal playback.
Press the TOP/>|| button long to play the first track.
(2)Press the INT button to play the first 10 seconds part of each track, and the LCD will display INT ON.
Press again to stop scan, while the currently selected track will be played, and the LCD will display INT
OFF.
(3)Press the RPT button to play the current track repeatedly, and the LCD will display RPT ONE.
Press the RPT button again to play the tracks in the current folder repeatedly and the LCD display will
show RPT ABM.
Press again to cancel this function, and the LCD will display RPT OFF.
(4)Press the RDM button to play all tracks in random , and the LCD will display RDM ON.
Press again to cancel this function, and the LCD will display RDM OFF.
(5)Press 6 or 5 button to move up and down for 10 tracks at a time.
Press and hold the +10/-10 to select the next or previous folder to be play.
When the total tracks are less than 10, the both buttons are inactively.
22. AUX JACK
Press the mode button to select AUX mode. You can connect any matched external audio device to
the AUX jack. Then operate the audio device and use the player as amplifier.
23. USB SOCKET
When needing to play the files in the USB stick, insert the USB stick into the USB socket. The system
will change into the USB mode automatically, and then play the first file in the USB.

24. SD CARD SLOT

When you need to play the files in a SD card, insert the SD card into the SD card slot. The system will
change into SD mode automatically, and then play the first file from the SD card.
Note:
When SD card and USB stick are both inserted into their slot or socket, the system will change into
the playback mode of the latter one.

25. RESET BUTTON

When the LCD displays incorrectly, some buttons do not function or the sound is distorted, press the
REL button to detach the front panel from the main unit, then remove the front panel and press the
RESET button to rehabilitate the distorted program to zero.
5