Operation Of Tuner - Bosch Plena LBB 1961 Manual Del Usuario

Tabla de contenido

Publicidad

16
15
BG M source
R e p e a t
Power
Program
Folder
1
2
3
en

Operation of tuner

Station selection
• Use the tuner FM/AM selection key (11) to choose between FM and AM reception.
• Use the tuner frequency up/down keys (12) to step up or down in frequency.
Prolonged pressing makes the tuner search for the next station.
Programming
• Save the selected radio station as a preset by pressing the tuner program key (9).
• Press the tuner memory keys M1/6 to M5/10 (7) for memory position 1 to 5, or
• Press the tuner program key (9), the tuner shift key (8) and the tuner memory keys M1/6 to M5/10 (7) for memory
position 6 to 10.
The tuner display (13) shows 'MEMORY' during this process. Both for AM and FM, 10 presets are available.
Saved presets are selected by pressing the tuner memory keys M1/6 to M5/10 (7) or by pressing the tuner shift key (8)
followed by M1/6 to M5/10. For easy selection, pressing the tuner scan key (10) monitors the presets by selecting all 10
presets sequentially for 5 seconds.
Operation of CD-player
Track selection
Note After inserting a new CD, the CD-player detects the type of CD and shows it on the CD display (14): 'CD'
for an audio-CD or 'MP3' for a disc containing MP3-files. Note that loading of MP3-CD's may take longer,
depending on the number of tracks and subdirectories, as an internal table of contents is made. The MP3-files in
the root directory and in the subdirectories are all put in separate folders for easy track selection. The folder
number is indicated on the display, followed by the track number and the time.
For track selection on audio-CD's proceed as follows:
• Use the CD previous key (3) and/or the CD next key (5) to select the track. Prolonged pressing results in fast reverse
or fast forward.
• Use the CD pause/play key (4) to pause or to play (resume playing).
• Use the CD stop/eject key (6) to stop playing (press once) and/or to eject the CD (press twice).
For track selection on MP3-CD's first select the folder that contains the track. Proceed as follows:
• Press the CD MP3 folder selection key (2)
• Press the CD previous key (3) and/or the CD next key (5).
The display shows 'FOLDER' during this process. Pressing the CD MP3 folder selection key once more resumes the
track selection mode in the selected folder.
By repeatedly pressing the CD repeat key (15) you select the following modes:
- Playing all tracks (MP3: in all folders) and stop.
- Repeating the current track. The display shows '1'.
- Repeating all MP3-tracks within the current folder. The display shows '
- Repeating all tracks (MP3: in all folders). The display shows '
- Random playing of tracks (MP3: in all folders). The display shows 'RANDOM'.
If a MP3-CD is stopped and loaded again, the player will resume playing where it was stopped. In this way it is avoided
that only the first part of a very long MP3-CD is played over and over again each day. If, however, an audio-CD is
stopped and loaded again, it just starts with track 1.
Programming
To program a playlist selection:
• Press the CD program key (16).
• Select a track by pressing the CD previous key (3) and/or the CD next key (5).
In the case of a MP3-CD folder selection is possible, as described above.
• Press the CD repeat key (15) to store the first track and step to the next track of the playlist, open for selection.
• Repeat this process until the playlist is finished.
• Finally press the CD pause/play key (4) to start playback of the playlist.
14
4
5
6
C D / M P 3
M1/6
'.
'.
15
BGM SOURCE
13
12
FM/AM
Scan
M2/7
M3/8
M4/9
M5/10
Shift
Program
CL 24155961_003
7
8
9
11
10
310102

Publicidad

Tabla de contenido
loading

Tabla de contenido