Contact Us - M-Audio FIREWIRE SOLO Guia De Inicio Rapido

Sync Source - This field allows you to choose between the FireWire Solo's INTERNAL clock and
<
an EXTERNAL S/PDIF clock source.
< S/PDIF Output Source - Selecting "mixer" routes the signals assigned to the S/PDIF output from
the control panel mixer to the S/PDIF output. Selecting "Pass Thru" allows a surround-encoded
stream such as AC3 or DTS to be sent to the S/PDIF output.

Contact Us

For additional help, technical support is available on our website at www.m-audio.com, where you
can fill out our technical support form.
Alternatively, you can email us at support@m-audio.com,
Or contact us by phone at: (626) 633-9055.
Technical support is available by telephone from 7am - 7pm PST
Tested to comply with
FCC standards
FOR HOME OR STUDIO USE
FireWire Solo
8