Speed Dials - Pantech Jest Manual Del Usuario

TO SEND A VIDEO MESSAGE TO A GROUP
1. Slide the phone up, press the
2. Select the group you want to send a message to, then press the Right Soft Key
[Options].
3. Press 3. New Video Message.
4. Under Text, input your message and then press the Directional Key
5. Under Video, press the Left Soft Key
would like to send then press the OK Key. Press the Directional Key
6. Under Name Card, press the Left Soft Key
Card or 2. From Contacts then press the OK Key. Select the desired card then
press the OK Key. Press the Directional Key
7. Under Subject, input a subject using the QWERTY Keypad.
8. Press the Right Soft Key
Preview, Save As Draft, Insert Quick
Remove Name Card or Cancel
These options will vary depending on the message contents chosen.
9. To send the Video Message, press the OK Key [SEND] or press the SEND Key
TO SEND A VOICE MESSAGE TO A GROUP
1. Slide the phone up, press the
2. Select the group you want to send a voice message to, then press the Right
Soft Key [Options].
3. Press 4. New Voice Message.
4. To record a new Voice Memo, press the OK Key to start recording, then press the
OK Key [STOP] to finish recording and save the voice memo.
5. Under Voice, your recorded file name will appear. Press the Directional Key
down.
6. Under Text, input your message then press the Directional Key
50
[MENU], then press 3. Contacts, 4.
[My Videos], select the video you
[Add], select 1. My Name
down.
[Options] to select from the following:
Text, Priority Level, Remove
Message.
[MENU], then press 3. Contacts, 4.
down.
7. Under Name
Card or
Groups.
press the OK Key. Press the Directional Key
8. Under Subject, input a subject using the QWERTY Keypad.
9. Press the Right Soft Key
Review,
down.
Recording,
down.
These options will vary depending on the message contents chosen.
10. To send the Voice Message, press the OK Key [SEND] or press the SEND Key
.

SPEED DIALS

From idle mode, calls can be placed to numbers stored in speed dials by sliding the
Video,
phone up, and pressing & holding the location number on the keypad.
1. Slide the phone up, press the
5. Speed
2. Highlight the desired Speed Dial position, or enter the Speed Dial digit, then
.
press the OK Key [SET].
3. Select the desired Contact entry, then press the OK Key.
Groups.
4. Highlight the number you wish to set to speed dial then press the OK Key.
5. "ASSIGN SPEED DIAL TO
press the OK Key. A confirmation message appears.
"Unassigned" appears if the location is available.
TO ERASE A SAVED SPEED DIAL
1. Slide the phone up, press the
5. Speed
2. Select the Speed Dial entry you want to erase.
Card, press the Left Soft Key
2. From Contacts then press the OK Key. Select the desired card then
down.
[Options] to select from the following:
Save As Draft, Insert Quick Text, Priority
Remove Name Card or Cancel Message.
[MENU], then press
Dials.
CONTACT?" appears on the screen. Select
[MENU], then press
Dials.
[Add], select 1. My Name
01
02
Level, Remove
03
04
05
06
07
3. Contacts,
Yes and
3. Contacts,
51