Black+Decker MTNF9 Manual De Instrucciones página 6

ENGLISH
To release the valve adaptor (12), lift the lever
u
(17) and remove the nozzle (or remove from
the valve adaptor fromt he nozzle of the bicycle
or car tyre)
Note: When not in use, the adaptor nozzles (15
& 16) can be stored in the accessory storage
compartment (14) lift the rubber flap and insert the
nozzles, then close the rubber flap.
Warning! Always make sure that the lever is in the
up position when not in use. Operate your inflator
only with the universal valve adaptor or with the
included nozzles.
Warning! Make sure that the universal valve
adapter is firmly locked in place before turning the
inflator on.
Use
Warning! Let the tool work at its own pace. Do not
overload.
Inflating
Note: Ensure the forward reverse slider (2) is not
in the locked position.
To switch the tool on, press the variable speed
u
switch (1). The tool speed depends on how far
you press the switch.
To switch the tool off, release the variable
u
speed switch.
6
(Original instructions)
Warning! Do not leave the inflator running unat-
tended. It could burst tyres or other items.
Warning! Excessive air pressure may cause a
hazardous risk of bursting or personal injury. Check
the manufacturer's maximum pressure rating for
items being inflated.
Hints for optimum use
Only use the supplied nozzles with this inflator.
u
The pressure gauge is intended as a guide
u
only. Tyre pressures should be regularly
checked with a certified gauge
Many inflatables have an internal flap that prevents
air loss during inflation. Unless this flap is dis-
placed by the nozzle the inflatable will not inflate.
Push the nozzle firmly into the valve to make sure
that you push this flap out of the way.
Accessories
The performance of your tool depends on the
accessory used. BLACK+DECKER and Piranha ac-
cessories are engineered to high quality standards
and designed to enhance the performance of your
tool. By using these accessories you will get the
very best from your tool.