Tabla de contenido
Publicidad
Operation (Cont.)
Stop: Press
When the unit is stopped with the remote controller, the fan on the outdoor unit may continue
to run for a while, even though the compressor of the outdoor unit stops.
If the unit is not heating very effectively with a Low fan speed
speed to High
Depending on the indoor unit being used, it may indicate a function that it does not have. (The fan
speed is constant.)
If you cannot turn the air conditioner off in the normal way
Disconnect the power to the indoor unit and contact the distributor where the product was
purchased.
<Auto operation>
Only when identical refrigerant system inside all the indoor units or cooling/heating free-type are
under control as one group. It heats or cools automatically via the differences between the set
temperature and the room temperature.
<Dry operation>
•
Depending on the indoor unit used, the remote controller may have a [Dry]
display even though the unit does not have the Dry function. (Same as cooler operation)
•
When the room temperature approaches the temperature setting, the unit continues to start up
or stop automatically.
•
When the drying mode stops operating, the indoor unit's fan blows a gentle breeze in order to
keep the moisture from returning to the room at a minimum.
•
Depending on the indoor unit used, and/or the temperature in the room, the fan speed may not
be adjustable.
•
Depending on the unit used, when the outside air temperature is 15 °C or less, the dry function
will not operate.
8
.
or Medium
.
, switch the fan
indicator on its
Publicidad
Tabla de contenido
