2.
Connect the unit to the power outlet (220-240V - 50/60Hz).
3.
Press the buttons on the control panel as follows:
●
POWER:
Press the button to turn the unit on or off.
●
SPEED:
Set the desirable fan speed (HI, LOW). The default speed is HI.
Press the button to activate the timer function (1h – 7h). The set time
●
TIMER:
will appear on LED Display. You can increase the set time hourly by
pressing this button.
●
OSC:
Press the button to activate or deactivate the oscillation of the fan.
CLEANING AND STORAGE
Before cleaning the unit turn the power off by pressing the POWER button, wait a few
minutes and then unplug the power cord from the outlet.
Clean the unit using a damp cloth, and then wipe it using a dry cloth.
Do not use chemical solvents (such as gasoline, alcohol). The surface and the entire
housing could be damaged.
Gently remove the cover, than remove the air filter.
Rinse the filter under running water and dry it with a soft cloth.
We recommend cleaning the unit once a month.
If you don't use the unit for a longer time period, so please turn it off, unplug the power
cord an take the unit to a dry, cool and safe place.
Do not expose the unit to direct sunlight.
EC-DECLARATION OF CONFORMITY
The unit complies with the essential health and safety requirements of the European Union.
The EC declaration of conformity is the basis for the CE marking of this unit.
With the publication of this manual, all previous are not valid. SUNTEC, SUNTEC Wellness,
KLIMATRONIC and the Sun logo are registered trademarks. © 2016/01 SUNTEC
WELLNESS GMBH
Oscilation
Timer, up to 7 hours (1 hour per setting).
Fan speed: HI, LOW
On / Off
11