Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
A P P L I C A T I O N A N D O P E R A T I O N
5.3
Starting-up the milling machine
5.3.1
Machine
E N
▷ Switch the milling machine on via the main
switch.
The milling machine runs through an automatic
sequence via the screen for entering the basic
settings:
▪ Basic settings network connection
▪ Referencing axis system
▪ Filling tank and flushing coolant circuit
▪ Inserting swarf sieve
▪ Inserting tools
▷ Follow the instructions on the screen.
All settings can also be entered or changed later
via the menu.
34
6
Application and Operation
WARNING:
Danger from shavings/chips or tool fragments
being thrown from the machine!
▷ Make sure that the door of the milling
machine is always closed during processing!
The water for the coolant/lubricant must
have drinking-water quality. The optimal
hardness range is between 10 - 20 °dH
(corresponds to 1.8 - 3.6 mmol total hard-
ness per litre). If the hardness is far
beyond this range, we recommend the
addition of distilled water. For grinding
glass-ceramic materials, it is generally rec-
ommended to use distilled water.
6.1
Symbols on the buttons
Symbol
Designation
Tools
Machine
Settings
Messages
Opening/closing the
door of the milling
chamber
Diameter, tool insert
Tool wear
Tab. 2
Where?
Start screen
Varies
Tool over-
view
Publicidad
Tabla de contenido
