Cleaning The Machine - Amann Girrbach ceramill 181400 Manual Del Usuario

8.3 Manual service
Independent of the specified service intervals,
manual service can be performed at any time.
▷ In the start screen, press button
The screen displays:
▷ Press
Maintenance button
desired maintenance.
As a reminder for the regular maintenance, a day
of the week can be set.
8.3.1

Cleaning the machine

▷ Press
Clean machine button
wizard's instructions.
S E R V I C E ( C L E A N I N G A N D M A I N T E N A N C E )
.
and select the
and follow the
8.3.2 Cleaning the collet
The provided spindle service set is required for
maintenance of the spindle.
Fig. 6 Service set for collets
1 Collet tool
2 Spindle brush
3 Collet brush
4 Collet grease
NOTE:
Only use the provided collet grease for lubrica-
tion of the collet cone. Do not use other types of
grease.
For remaining debris, the collet can be
cleaned in distilled water in an ultrasonic
bath/with a steam jet cleaner.
▷ Do not use solvent for cleaning.
To prevent contamination of the spindle,
compressed air is actively expelled during
collet cleaning. This may cause whistling
noises.
▷ Press
Clean collet button
ard's instructions.
1
2
3
4
and follow the wiz-
41
E N