3M Clean-Trace Manual Del Usuario página 19

(English)
to retest previous unplanned test points use the navigation buttons to highlight the required test session and press the Select button.
the first test point is highlighted and the test is ready to begin.
Press Measure.
As the instrument starts to measure, note that the test point names are automatically generated from the test point count for the current result set.
e.g. Measure 1, Measure 2 etc.
the value of the test is now displayed, the next test point is generated and also highlighted ready for test.
Press Measure to perform another test or press back to finish the result set and return to the unplanned testing Menu.
For information on transferring results generated in Program Mode and unplanned testing to the Pc, refer to the communicate section of the 3M
clean-trace Data trending software Quick start user Guide.
17