Publicidad
Idiomas disponibles
Idiomas disponibles
TFA_No. 35.1123_Anleit_07_17
10.07.2017
LOOK – Wireless weather station
• Batteries may be hazardous if swallowed. If a battery is swallowed, this can lead to serious
internal burns and death within two hours. If you suspect a battery could have been swallowed
or otherwise caught in the body, seek medical help immediately.
• Batteries contain harmful acids. Low batteries should be changed as soon as possible to pre-
vent damage caused by leaking. Never use a combination of old and new batteries together, nor
batteries of different types.
• Wear chemical-resistant protective gloves and glasses when handling leaking batteries.
Important information on product safety!
• Do not place the unit near extreme temperatures, vibrations or shocks.
• Protect from moisture.
• The outdoor transmitter is protected against splash water, but is not watertight. Choose a shady
and dry position for the transmitter.
5. Elements
Receiver (Basic unit)
A: LCD Display (Fig. 1):
A 1:
Time
A 2:
Alarm symbol
A 3:
Snooze symbol
A 4:
Date and weekday
A 5:
Moon phase
A 6:
Indoor humidity
A 7:
Comfort level indicator symbol
A 8:
Weather symbol
A 9:
Indoor temperature
A 10:
Temperature trend indoor
A 11:
Channel number
A 12:
Reception symbol of outdoor data
A 13:
Outdoor temperature
A 14:
Temperature trend outdoor
A 15:
Temperature alarm symbol
B: Buttons (Fig. 1):
B 1:
TIME button
B 2:
ALARM button
B 3:
UP button
B 4:
DOWN button
B 5:
SNZ button
B 6:
MAX/MIN button
B 7:
ALERT button
B 8:
CHANNEL button
14
10:29 Uhr
Seite 8
LOOK – Wireless weather station
C: Housing (Fig. 2):
C 1:
Wall mount hole
C 2:
Battery compartment
C 3:
Stand (fold out)
D: Transmitter (Fig. 3):
Buttons:
D 1:
°C/°F button
D 2:
Channel slide switch
LCD:
D 3:
Outdoor temperature
D 4:
Indication channel
Housing:
D 5:
Wall mount hole
D 6:
Battery compartment
D 7:
Mounting holes for the stand
6. Getting started
• Remove the protective films from the display of the basic station and from the transmitter front.
Insert batteries:
• Place both instruments on a desk with a distance of approximately 1.5 meter. Check that no
other electronic devices are close.
• Open the battery compartment of the transmitter by pushing the battery compartment cover
downwards (see marking) and lift the cover.
• Insert two new batteries 1,5 V AAA, ensure battery polarity is correct.
• Close the battery compartment again.
• Open the battery compartment of the basic unit and insert two new batteries 1,5 V AAA, ensure
battery polarity is correct.
• A brief beep tone will sound and all LCD segments will light up for a short moment.
• Close the battery compartment again.
• The unit is now ready to use and starts to scan the outdoor sensor data.
Reception of outdoor values
• The basic unit automatically starts scanning the 433 MHz signal to register the transmitter after
batteries are inserted. If the reception of outdoor values fails, "- -" appears on the display.
Check the batteries and try it again. Check if there is any source of interference.
• Manual initialization can be helpful. Press CHANNEL button for 3 seconds.
7. How to operate
7.1 Manual setting of clock, time zone and calendar
• Hold TIME button in normal mode. The year digit is flashing. Press UP or DOWN button to
adjust year.
15
Publicidad
