Cleaning The Brewing Unit; Troubleshooting - cecotec Power Matic-ccino 6000 Manual De Instrucciones

• Store the machine in a safe, dry and clean place if it is not going to be used during long
periods.
• Clean both the visible parts of the machine and the area beneath it in order to remove all
residues.
• Clean thoroughly and empty the tank before storing the device.

CLEANING THE BREWING UNIT

• Open the right-side door.
• Remove the waste container.
• Remove the brewing unit and
rinse it with warm water.
• Insert the brewing unit back and
wait until you listen a "Click" to
confirm it is properly fixed in its
correct position.

6. TROUBLESHOOTING

Warning signal and solution:
Fill the water tank (1).
Add coffee beans to the tank (2).
The drip tray is missing. Please, install it in its correct position (3).
1
The coffee residues tank is not installed in place or full. Please, empty it and install it in its
correct position (4).
Brewing unit is missing. Please, install it in its correct position (5).
The right door is open. Please, close it (6).
2 3
POWER MATIC-CCINO 6000
ENGLISH
27