Volume Setting - Kathrein UFO 382 Manual Del Usuario

2.7.2 Volume setting

A 1236 MHz
TV Das Erste
Outp. Ch12
stereo Vol-3
2.8 Operating mode of AV interface (15-pin Sub-D, high density)
A 1236 MHz
TV Das Erste
Outp. Ch12
stereo Vol -3
*** UFO 382
Video internal
Audio external
< Return:
"RF on" or "RF off" can be selected with the "+" or "–" keys.
"RF off" switches off the output signal in the channel unit, e.g. for measurements.
7 Configuration of the Submin-D socket
Pin 1
Signal Audio FBAS-*
input
left
Weighted
*)
FBAS = Composite colour signal
Internet : http://www.kathrein.de
KATHREIN-Werke KG · Anton-Kathrein-Str. 1–3 · P. O. Box 10 04 44 · 83004 Rosenheim / Germany · Tel. +49(0)80 31/ 18 4 0 · Fax +49(0)80 31/ 184 306
27,500 MS/s
deu
224.25 MHz
AV
27,500MS/s
deu
224.25 MHz
AV
***
RF on
Submenu >
2 3 5
Video- FBAS-*
input : switching output
video signal
0/12 V
Setting of volume with keys "+" or "–".
The setting range lies between – 6 and + 6.
After having selected the field "AV" with the submenu key,
the following display will appear in the submenu :
"internal" Video and audio signal are interconnected within the
module. The AV interface can be switched over (interruption of an
internal signal path) using external switching voltages (+12 V),
e. g. from a video recorder
Examples of use :
– Operation with video recorder or video camera
"external" Internal signal path is interrupted, external switching
voltages have no influence for A/V signal sources that cannot
supply a switching voltage. Both operation modes can be set
individually for video and audio.
6 7
Audio Audio
input switching Mass
right signal
0/12 V
8 11 12
Audio
Mass output
left
13
Audio
output
right