Setting The Volume - Kathrein UFO UFO 394 Manual Del Usuario

2.8

Setting the Volume

I 1236 MHz
TV Das Erste
Outp. CH12 244.25MHz
Auto Vol 0 dB
2.9 AV interface operating mode
I 1236 MHz
TV Das Erste
Outp. CH12 244.25MHz
Auto Vol0dB
*** UFO 394
Video Internal
Audio External
3. Software Update
The operating software for the channel can be updated locally.
To do this, a PC, a null modem cable for COM 1/2 and an interface adapter with connection cable for connection to the UFO 394
controller are required.
The reference source for this is the respective Kathrein sales centre or the respective agent for the country.
The update program and the latest fi rmware for the module can be downloaded from the homepage of the Kathrein
Service Centre ESC at "http://www.esc-kathrein.de".
Attention:
Software can be updated during reception of programmes. The programme that is running is merely interrupted for about
5 seconds at the end of the update.
If the module is removed or mains power is lost during an update, this does not permanently damage the module. The update
simply must be repeated.
Electronic equipment is not household waste - in accordance with directive 2002/96/EC OF THE
EUROPEAN PARLIAMENT AND THE COUNCIL of 27
equipment, it must be disposed of properly.
At the end of its service life, take this unit for disposal at a designated public collection point.
Internet: www.kathrein.de
KATHREIN-Werke KG • phone +49 8031 184-0 • Fax +49 8031 184-306 • Anton-Kathrein-Straße 1 - 3 • P.O. Box 100 444 • 83004 Rosenheim GERMANY
All manuals and user guides at all-guides.com
Select the "Volume" parameter.
27.5 MS
Perform the volume setting using the scroll buttons.
The adjustment range is from -3 through 0 to +3 dB.
deu
AV
After selecting the fi eld "AV" with the sub-menu button, the following selection
27.5 MS
options appear in the sub-menu:
deu
AV
AV
"Internal"
Video and audio signals are through connected internally within the unit.
***
External switching voltages (+12 V), e.g. from a video recorder, can be used
to switch over the AV interface (disconnecting the signal path within the unit).
Examples of use: Operation with video recorder or video camera.
"External"
The signal path within the unit is disconnected, external switching voltages
have no effect on A/V signal sources which can supply no switching voltages.
Both operating modes can be selected independently for video and audio.
th January 2003 on used electrical and electronic