Bluetooth Operation - Roadstar HIF-1690BT Manual De Instrucciones

5 English
CD DISC PROGRAMMING
Up to 99 tacks can be programmed for mp3 (20 in CD) and play in any order.
before use, be sure the system is at stop mode before programming:
1. In cd mode and stop the cd playback.
2. Press the PROGRAM BUTTON (34). Moreover, it will indicate program no.
and digits for track no. to be programmed.
3. Select a desired track by pressing SKIP UP/DOWN BUTTONS (3)/(4).
4. Press the PROGRAM BUTTON (34) to store the trace into memory.
5. Repeat steps 3 and 4 to enter additional tracks into the memory if necessary.
6. When all the desired tracks have been programmed, press PLAY/PAUSE
BUTTON (2) to play the disc in assigned order.
7. To cancel the programmed file, press STOP BUTTON (26).
PLAYBACK OF MP3/WMA SONG VIA USB STORAGE MEDIA
The system is able to decode and playback all mp3 /wma file which stored in the
memory media with usb connecting port.
1. Press USB (8) to select "USB" mode.
2. Plug-in the usb plug with the face up & make sure it going into completely.
3. The system will start reading the storage media automatically after connecting,
and lcd display (18) will show the total number of mp3/wma files
4. Repeat the same playback procedure as playing cd/mp3 disc as above.
REMARKS:
The system can detect and read the file under mp3 and wma format only

though the usb port.
If connect the system to mp3 player via the usb socket, due to variances in

mp3 encoding format, some mp3 player may not be able to play via the usb
socket. this is not a maul-function of the system.
Connecting the usb upside down or backwards could damage the audio sy-

stem or the storage media (usb thumb drive). Check to be sure the direction is
correct before connection.
LISTENING TO TAPE
1. Load a cassette tape into the unit. The system will start playback automatically
after inserting the cassette tape.
2. Press CASSETTE STOP/EJ BUTTON half inwards during playback mode. The
tape will wind forward.
3. Slightly press the CASSETTE STOP/EJ BUTTON again to resume playback.
4. Press the CASSETTE STOP/EJ BUTTON completely inwards and the casset-
te tape will be ejected through the CASSETTE DOOR (17).

BLUETOOTH OPERATION

1. Press the BT button, the BT indicator will light up.
2. Select from your portable device (Smartphone, Tablet...) the ID Bluetooth tag-