Elu After-Sales Service - Elu MTS24 Manual De Instrucciones

Performing a cut (fig. A)
• Place the material to be cut against the fence (7)
and secure using the material clamp (6).
• Switch on the machine and pull down the control
handle (2) to cut the workpiece. Allow the motor
to reach full speed before cutting.
• Allow the blade to cut freely. Do not force.
• After completing the cut, switch off the machine
and return the arm to its upper rest position.
Switching on and off (fig. A)
The on/off-switch (1) of your chopsaw is mounted in
the control handle (2).
• To run the tool, press the on/off-switch (1).
• Keep the on/off-switch depressed while
performing the operation.
• To stop the tool, release the switch.
Do not switch the tool on or off when
under load.
Do not cut magnesium.
Consult your dealer for further information on the
appropriate accessories.
Transport (fig. L)
Your Elu power tool is equipped with a lock-down
pin (36) which locks the tool in closed-down position
for carrying.
• Lower the guard (4) onto the cutting table (9)
and secure the power tool in this position by
pushing in the lock-down pin (36).
• Transport the power tool using the carrying
handle (3).
• To release the tool, pull out the lock-down pin (36).
Maintenance
Your Elu Power Tool has been designed to operate
over a long period of time with a minimum of
maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Lubrication
Your power tool requires no additional lubrication.
22
Cleaning
Keep the ventilation slots clear and regularly clean
the housing with a soft cloth.
Unwanted tools and the environment
Take your tool to an Elu authorized repair agent
where it will be disposed of in an environmentally
safe way.

Elu After-Sales service

All Elu Power Tools are thoroughly tested before
leaving the factory. However, if the Power Tool
needs repair, please contact your dealer or the Elu
Head Office for the address of the nearest Elu
authorized repair agent (please refer to the back of
this manual). Alternatively, a list of authorized Elu
repair agents and full details on our after-sales
service are available on the Internet at
www.2helpU.com.
GUARANTEE
• 30 DAY NO RISK SATISFACTION GUARANTEE •
If you are not completely satisfied with the
performance of your Elu tool, simply return it
within 30 days, complete as purchased, to your
Elu dealer for a full refund or exchange. Proof of
purchase must be provided.
• ONE YEAR FULL WARRANTY •
If your Elu product becomes defective due to
faulty materials or workmanship within 12 months
from the date of purchase, we guarantee to
replace all defective parts free of charge or,
at our discretion, replace the unit free of charge
provided that:
• The product has not been misused.
• Repairs have not been attempted by
unauthorized persons.
• Proof of purchase date is provided.
This guarantee is offered as an extra benefit and
is additional to consumers statutory rights.
E N G L I S H
en - 7