Product Instructions
DJSxs50 - DJSxs80
1
EN
DJSxs50-80 are designed to be used with DSTxs 50 cNm and DSTxs 80
cNm.
Install the DSTxs on a stable horizontal working station with four fixing bolts
M4 (for further information, refer to DSTxs – Digital Static Transducer Product
Instructions.
Desoutter
https://www.desouttertools.com/resource-centre).
To install DJSxs50-80 on the DSTxs 50-80 cNm, do the following:
1.
Move the sliding ring placed on the DSTxs upward (figure 1).
2.
Insert the DJSxs into the DSTxs (figure 2).
3.
Move the sliding ring downward to block the DJSxs on the DSTxs
(figure 3).
2
8 / 146
User
Guides
3
are
available
09/2019
at