Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
2.- INSTALLATION
The heater must be installed and used in accordance with current electrical legislation.
To prevent danger, heed the safety instructions.
Important! Ensure that there are no electrical cables or other installations (for example, water pipes) close
to the drill holes. Make sure that the device has been positioned securely and vertically against the wall.
Make the drill holes on the wall 2 m from the floor and at least 25 mm from the closest wall. Insert the bolts
in the holes, making sure they protrude 10 mm from the wall. Hang the device after making sure that the
bolts have been fixed securely.
Position the heater on a firm and flat surface. The main button should face down. Connect the device to an
AC 220-240V electrical socket. It will emit a "BEEP" sound, the "Power" light will come on and the heater
will show the pre-set temperature. It will flash for 3 seconds.
3.- OPERATION
3.1. Control Panel
3.2. Remote control
The control uses a CR2025 3V lithium battery.
ON/OFF
24H
MODE
Swing
LOCK
AUTO
Delay
W.Timer
+ / -
Set
8
On/Off button
1-24 hours timer
Select mode
Air outlet swing
Heater child lock
Open window function
Adjust temperature (week mode)
Weekly timer
Up / Down
Set time
Publicidad
Tabla de contenido
