Installation instructions
Step 9. Install the grates
NOTE
Install the grates as instructed below for longest life. When installed properly, the
openings in the grates are centered over the burners.
The two cooktop grates are designed to fit in specific positions on the cooktop.
For maximum stability, these grates should only be used in their proper positions.
• Distinguish the left and right grates. When picking up the grates, you can see the
LEFT and RIGHT letters near the overhangs of the grates.
• Place the grates with the overhangs and letters at the back and the overhangs
facing out. Then put the grate with the LEFT letter on the left side, and the grate
with the RIGHT letter on the right side.
The left and right grate have overhangs and letters to help you locate
the side grates correctly. They will stack up and be placed unevenly
when you locate wrong direction. See the illustration below.
20 English
To replace the grates correctly, follow these steps:
1.
Overhangs must be placed outward.
Make the rubber feet of the grates match with the panel bulge.
2.
3.
Adjust the grates to place it on the panel smoothly