General Safety Rules - For All Battery Operated Tools; Work Area; Electrical Safety; Personal Safety - DeWalt DW0242 Manual Del Usuario

Taladro destornillaodr inalambrico con embraque ajustable
Ocultar thumbs Ver también para DW0242:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR
ANY D
WALT TOOL, CALL US TOLL FREE AT:
E
1-800-4-DEWALT (1-800-433-9258)
General Safety Rules – For All Battery
Operated Tools
WARNING! Read and understand all instructions. Failure to fol-
low all instructions listed below may result in electric shock, fire and/or
serious personal injury.
SAVE THESE INSTRUCTIONS

WORK AREA

• Keep your work area clean and well lit. Cluttered benches and
dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such
as in the presence of flammable liquids, gases, or dust. Power
tools create sparks which may ignite the dust or fumes.
• Keep bystanders, children, and visitors away while operating
a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

• Do not abuse the cord. Never use the cord to carry the tool.
Keep cord away from heat, oil, sharp edges or moving parts.
Replace damaged cords immediately. Damaged cords may cre-
ate a fire.
• A battery operated tool with integral batteries or a separate
battery pack must be recharged only with the specified charg-
er for the battery. A charger that may be suitable for one type of
battery may create a risk of fire when used with another battery.
• Use battery operated tool only with the specifically designated
battery pack. Use of any other batteries may create a risk of fire.

PERSONAL SAFETY

• Stay alert, watch what you are doing and use common sense
when operating a power tool. Do not use tool while tired or
All manuals and user guides at all-guides.com
• Dress properly. Do not wear loose clothing or jewelry. Contain
• Avoid accidental starting. Be sure switch is in the locked or off
• Remove adjusting keys or wrenches before turning the tool
• Do not overreach. Keep proper footing and balance at all
• Use safety equipment. Always wear eye protection. Dust mask,
TOOL USE AND CARE
• Use clamps or other practical way to secure and support the
• Do not force tool. Use the correct tool for your application. The
• Do not use tool if switch does not turn it on or off. A tool that
• Disconnect battery pack from tool or place the switch in the
1
under the influence of drugs, alcohol, or medication. A
moment of inattention while operating power tools may result in
serious personal injury,
long hair. Keep your hair, clothing, and gloves away from
moving parts. Loose clothing, jewelry, or long hair can be caught
in moving parts. Air vents often cover moving parts and should also
be avoided.
position before inserting battery pack. Carrying tools with your
finger on the switch or inserting the battery pack into a tool with the
switch on invites accidents.
on. A wrench or a key that is left attached to a rotating part of the
tool may result in personal injury.
times. Proper footing and balance enables better control of the tool
in unexpected situations.
non-skid safety shoes, hard hat, or hearing protection must be
used for appropriate conditions.
workpiece to a stable platform. Holding the work by hand or
against your body is unstable and may lead to a loss of control.
correct tool will do the job better and safer at the rate for which it is
designed.
cannot be controlled with the switch is dangerous and must be
repaired.
locked or off position before making any adjustments, chang-

Publicidad

Tabla de contenido
loading

Tabla de contenido