Uline H-1127 Instrucciones De Montaje página 2

3. Mark the four holes on the wall where screws will be
inserted. (See Figure 3)
Figure 3
Recommended
Mounting
Locations
1. Insert key into lock opening on top of dispenser and
turn to open cover. (See Figure 5)
Figure 5
PAGE 2 OF 6
MOUNTING INSTRUCTIONS CONTINUED
LOADING INSTRUCTIONS
1-800-295-5510
4. Drill into wall at four marked locations with 1/4" drill
bit. (See Figure 4) Insert wall anchors if necessary.
Figure 4
5. Hold dispenser over previously drilled holes and
insert screws.
2. Insert a roll of jumbo bath tissue onto the arm.
(See Figure 6)
Figure 6
Jumbo Bath
Tissue
3. Close lid and begin dispensing. (See Figure 7)
Figure 7
uline.com
Arm
0521 IH-1127