cam Combo S166 Manual De Instrucciones página 17

COMBO 6 DIC 2017 15 lingue_Layout 1 06/12/17 17:33 Pagina 17
Caution: The correct positioning of the
headrest is essential for the safety of
your child. Do
circumstances remove the headrest. Sit
the child in the car seat.
Caution: The points where the seat
belts pass are marked in red. Do not
pass the car seat belts in any positions
other than those shown.
32. Position the diagonal car seat belt
on the child's chest and pass it under
the armrest of the car seat on the side
opposite the belt retractor.
Thread the belt into the belt guide
located under the headrest.
Pass the lap belt under the two
armrests of the car seat.
Tighten the car seat belt well, make
sure that it is not twisted and that it
rests securely under the armrests of
the car seat.
33. Fasten the car seat belt; a "click"
should be heard.
Caution: Every so often during the
journey check that your child has not
loosened himself from the car seat.
GROUPS 2 AND 3 WITHOUT THE
BACKREST, FROM 15 TO 36KG.
34. Push the backrest right back.
35+36. Hold the base firm with one
hand and remove the backrest from the
seat.
How to fit the car seat in the vehicle
Position the car seat on the seat of the
vehicle so that it rests fully on the seat
and against the backrest.
Caution: The points where the seat
belts pass are marked in red. Do not
pass the car seat belts in any positions
other than those shown.
37. Sit the child in the car seat.
Position the diagonal car seat belt on
the child's chest and pass it under the
armrest of the car seat on the side
opposite the belt retractor.
38. Pass the lap belt under the two
armrests of the car seat.
Tighten the car seat belt well, make
sure that it is not twisted and that it
rests securely under the armrests of
the car seat.
39. Fasten the car seat belt; a "click"
should be heard.
Caution: Every so often during the
journey check that your child has not
INSTRUCTIONS FOR USE
not under any
loosened himself from the car seat.
How to remove the cover.
40. Release both the safety belts from
the metal hook and remove them from
the backrest.
Remove the headrest cover.
Remove the car seat cover.
CLEANING
Caution: The covers are an integral part
of the car seat: the car seat cannot be
used without the covers. The covers
can only be replaced with original
parts.
The cover can be hand washed in
lukewarm water (max. 30°C) using mild
soap. Do not spin, do not iron and do
not use solvents. Follow the washing
instructions shown on the label of the
cover.
Wash the plastic parts with lukewarm
water and soap. Do not use aggressive
substances.
The safety harness can be removed and
washed with lukewarm water and soap.
Caution: do not remove the buckle
tongues from the harness.
41. Spare parts
1. Headrest
2. Headrest insert cushion
3. Backrest cover
4. Harness pad
5. 5-point harness
7. Buckle pad
10. Seat
12. Backrest insert cushion
13. Headrest height
mechanism
19. Backrest
20. Headrest cover
21. Seat cover
22. Instruction manual
23. Box/packaging
adjustment
16