LIMIT LDM 40 Manual Del Usuario página 6

START THE INSTRUMENT & MENU SETTING
GB
1. Turn on/off the instrument
Under off status, press button
by for measurement.
Under on status, long press button
can also be shut off without any operation for 150 seconds.
2. Unit setting
Long press button
There are 6 units for selection:
Length
1 0.000 m
2 0.00 m
3 0.0 in
4 0.00 ft
5 0 1/16 in
6 0'00"1/16
3. Changing reference point
Press key to change the reference point. The device reference point by default is rear.
4. Back light on/off
The back light is set to turn on and off automatically. The back light can be on for 15 s
while operating, and it will be shut off automatically in 15 s when there is no operation to
the device.
5. Sound on/off
Short press
LENGTH MEASUREMENT & CALCULATION
1. Single distance measurement
Turn on the laser beam by short press of the button
button again for single measurement of length, then the measured results displayed in
the major display area.
2. Continuous measurement
Long press button
Maximum measuring result displays in auxiliary display area, present result displays in
major display area. Short press button
3. Area measurement
Press button
One of the side of rectangle blinking on the display, please follow the below instructions
for area measuring:
Press once for length.
Press again for width.
The device calculates and shows the result in the major display area.
The recent measuring result of length is showed in the auxiliary display area. Press
clear off the result and measuring again if necessary.
Press again to exit the mode.
4. Volume measurement
Press button
of screen. Please follow the below instruction for volume measuring:
4
, device and laser get starting simultaneously and stand
, reset current measurement unit, the default unit is: 0.000 m.
Area
2
0.000 m
2
0.00 m
2
0.00 ft
2
0.00 ft
2
0.00 ft
2
0.00 ft
button to turn on or off the buzzer.
under measuring mode and enter into continuous measuring mode.
, shows on the screen.
twice to enter volume measurement mode. A
for 3 seconds to turn the device off. The device
Volume
3
0.000 m
3
0.00 m
3
0.00 ft
3
0.00 ft
3
0.00 ft
3
0.00 ft
under measuring mode, press the
or to exit continuous measuring mode.
,
will shows on the top