Axt100 Bodypack Transmitter - Shure AXT100 Guía De Usuario

• Conector versión LEMO (AXT100LEMO3) disponible para micrófonos con conector LEMO

AXT100 Bodypack Transmitter

① Infrared (IR) Port
② Power Button
③ Power Indicator LED
④ Microphone Input
⑤ Arrow Buttons
⑥ Set Button
⑦ Shure Rechargeable Lit­
hium-ion Battery
⑧ LCD Display
⑨ Dual­Band Flexible An­
tenna
⑩ Hardlock Switch
Use for automated transmitter programming. Links transmitter to AXT400 Receiver.
Hold for 1 second to turn the transmitter on. To power off, press and hold for 2 seconds until
the display reads Powering Off .
• When editing, acts as an exit button to cancel changes and return to a previous para­
meter or to the main menu screen
• In Talk Switch mode, the power button enables push-button audio routing of AXT400
XLR and TRS outputs
Green = power on
Red = audio input overload or low battery
Pulsing = pulsing indicates that the transmitter is set to RF mute
4-pin microphone input jack (LEMO version available)
Use to scroll through menu screens and to change parameter values.
Enables parameter editing. After editing is complete, press to save changes and return to
the main menu screen.
Delivers up to 8 hours of runtime from a single charge.
View menu screens and settings. Momentarily press power button to activate backlight.
Covers UHF tuning range and 2.4 GHz ShowLink signal.
Enables or disables Auto Power Mode locking options.
Shure Incorporated
4/18