Uline H-1121 Manual Del Usuario página 6

OPERATING ISSUE
Not displaying accurate weights.
Scale is indicating insufficient
sample.
Scale shuts off or will not turn on.
Error 2.
If the problem persists, or if the troubleshooting section does not resolve or describe your problem, contact Uline Customer
Service at 1-800-295-5510.
PAGE 6 OF 18
TROUBLESHOOTING
Make sure all shipping material has been removed (foam protective screw,
etc.).
Make sure there is nothing on the platform when the scale is turned on.
Make sure sample and piece weight meet the scales minimum require-
ments.
Remove battery and plug the scale in. If the scale works, you will need to
replace the battery.
Make sure shipping screw is removed from bottom of scale. Perform three
point calibration.
1-800-295-5510
uline.com
RECOMMENDATIONS
0421 IH-1121