Fitting And Removing The Wheels; Adjusting The Backrest - cam DINAMICO Manual De Instrucciones

IMPORTANT! KeeP THese iNsTRucTiONs
FOR FuTuRe ReFeReNce.
1. Read these instructions carefully before use. The safety of your child could be at risk if the
following instructions are not followed. 2. WARNING! Never leave your child unattended.
3. WARNING! make sure that all the locking devices are correctly engaged before use.
4. WARNING! To avoid injury ensure that your child is kept away when unfolding and folding
this product. 5. WARNING! Do not let your child play with this product. 6. WARNING! Always
use the restraint system. 7. WARNING! This product has not been designed for skating or
running. 8. ATTENTION! This product has been designed for children from birth to 15 kgs in
weight. 9. ATTENTION! We recommend to use the most reclined position of the backrest for
new born babies. 10. ATTENTION! Do not use accessories which are not approved by the
manufacturer. 11. ATTENTION! correctly engage the brake unit when the child is put in the
product or removed from it. 12. ATTENTION! Do not put weights on handle, backrest and on
the sides of the product: this should effect its stability. Never load the basket with more than 2
kgs. 13. This product has been designed for 1 child at a time. Never carry more than 1 child at
a time. 14. ATTENTION: cam il mondo del bambino reserves all the rights to amend the
product for technical or commercial reasons. 15. ATTENTION: always use the product as it has
been produced; on the contrary the producer will not be held responsible for any misuse. in case
of missing or broken parts, we recommend you to use original spare parts supplied by the
manufacturer only. 16. WARNING! Never use the crotch strap without the waist strap.
17. ATTENTION! in case you need to use an additional harness, fasten it to the D rings (19f).
18 ATTENTION! check there are no parts broken , bended or torn before using the product.
19. WARNING: check that carrycot, car seat or pushchair securing devices are correctly fitted
before using. 20. carrycot is suitable for children who cannot seat down unaided, roll or who
cannot lift up on their hands or knees. 21. car seat and pushchair do not replace a carrycot or
a bed. should your child need to sleep, then he should be placed in a suitable cot or bed.
22. WARNING! Do not put a mattress in the carrycot (optional) with a thickness of more than
20 mm. 23. Frame of the product is suitable for carrycot and car seat (optional) approved by
manufacturer only and provided with QuicKY sYsTem mechanism. 24. WARNING! Do not use
the frame without carrycot/pushchair/car seat to carry your child.
"THIS PRODUCT COMPLIES WITH THE REQUIRED SAFETY STANDARDS" - EN 1888:2012
INSTRUCTIONS FOR USE
HOW TO ASSEMBLE THE PUSHCHAIR.
1. Remove the pushchair from the box carefully, and then
from the cellophane, being sure to dispose of the
cellophane, and to keep away from children.
2. Rotate the handle at the same time as holding down
buttons "B" on either side.
3. To open the pushchair lift up the secondary locking
device "A",pull up on levers "c" found on either side of the
handles, and lift until completely opened. WARNING:
Before assembling any further parts, be sure to verify that
the chassis is completely opened and locked into position,
also be sure to verify that the pushchair is opened and
locked into position before use.

FITTING AND REMOVING THE WHEELS:

4. Align wheel pin G, with the rear wheel housing H. Push
in to position until a click is heard.
5. To remove the rear wheels, push on button i and pull
out of the wheel housing.
6. To fit the front wheels ,follow the illustrations.
INSTRUCTIONS FOR USE
7. Removing the front wheels. WARNING! Before use
ensure that all of the wheels are fitted correctly and
securely for the safety of the child.
INSTRUCTIONS FOR USE
8. To make the wheels swivelling, push the highlighted
lever. To fix them, push it up: the wheels will then
automatically lock once they are aligned.
9. USING THE REAR BRAKE: To engage
the brakes, push the "ON" lever
downwards. To disengage the brake
push downwards on the "OFF" lever.
10. To adjust the handle height press simultaneously on
buttons "B", situated at either side of the handle and adjust
to the height required.
11. ADJUSTING THE BACKREST: Press the handle on the
back of the seat upwards (1) and at the same time lower
the backrest to the required position (2). To raise the
backrest it simply has to be pushed upwards. The footrest
will adjust automatically according to the position of the
26