Washing Instructions - cam DINAMICO Manual De Instrucciones

the plastic joint to position 1, by pressing the internal
buttons, making sure to align the fitting to position "i",
illustration 1. insert the hood into the housing situated at
the rear of the armrests, until a "clicK" can be heard. (The
same housing is also used for the bumper bar when in the
rearward facing position).
HOW TO REMOVE THE BUMPER IN THE FORWARD
FACING POSITION
31. To remove the bumper bar, gate style, press on one
side only of the "T" buttons and open.
32. To completely remove the bumper bar press both "T"
buttons and slide out of the armrests.
FITTING THE LEG COVER (OPTIONAL)
33. Pass the leg cover under the bumper bar and attach
the press studs to secure.
34. HOW TO FIT THE RAINCOVER (OPTIONAL)
QUICK FOLDING:
35. To fold the pushchair firstly close the hood by
unlocking the tension bars on either side.
36. lift the secondary locking device by pulling downwards
on lever "A", and then pull upwards on the primary locking
devices "c" on either side of the pushchair handles, push
forward and then to complete the fast mode pull the
pushchair back towards yourself by gripping one of the
armrestʼs.
37. When the seat unit is rearward facing, the hood is
closed automatically by the chassis tubes.
38. To fold the pushchair with the seat unit in the forward
facing position, follow point 35. To become more
compact, fold the hood down towards the inside of the
pushchair.
COMPACT FOLDING:
39. Remove the hood and the bumper bar and proceed as
explained in point nr 36.
40. To make the folding even more compact, please
proceed as shown in the diagram.
41. RemOViNG THe FABRic cOVeR FOR WAsHiNG
PuRPOses
42. summeR VeRsiON
43. MAINTENANCE: Improper use of this pushchair, on
particularly dusty or dirty terrain may cause a
malfunction with in the product, (opening and folding
of the chassis, may not be as fluid, the front swivel
wheel system may not be easily manoeuvrable...) It will
be necessary to clean with a damp cloth, then dry
SPARE PARTS
N DESCRIPTION
50 inner fabric part
50a carrycot external
base cover - Optional
51 mattress
52 Apron
5 Armrest plastic cap
6 Armrest
7 screw supporting the seat
unit
9 complete front swivelling
wheels
9a Front wheel
9b Front hook to keep wheel
in fixed position
9c cap
11 Button to adjust handle
12 secondary safety lock
13 Handle
INSTRUCTIONS FOR USE
thoroughly, and finally spray all working parts with a
silicone spray. Pay particular attention to the parts
highlighted in figures a, b, & c.
Your pushchair will require regular maintenance to avoid
problems from everyday use. Do not leave your pushchair
out in prolonged exposure to direct sunlight, as this may
cause colours to fade and plastics to soften and become
damaged. Do not fold your pushchair when damp. All
moving parts should be regularly lubricated with silicone
spray. Replace any broken or damaged parts.
44. Regularly check if wheels have been pumped at 2.0 bar

WASHING INSTRUCTIONS

Hand wash in warm water (max 30°c)
with detergent for delicate garments. Do
not bleach. Do not use driers, do not dry
clean and do not iron. Hang out all the
covers to dry in the shade.
use warm water and soap to clean the
product. Do not use cleaning solvent or
similar products.
Dry metal parts to prevent the product
from getting rusty. Prolonged exposure
to sun and a inadequate washing can
cause changes to fabrics and materials.
Please limit them if possible. Do not fold
the pushchair when itʼs damp. clean
completely the product if used on the
beach in order to remove sand and salt
from wheelsʼ mechanisms. Hand wash in
warm water (30°c max) with washing
detergent for delicate clothes. Do not
bleach. Do not use dryer. Do not dry
clean. Do not iron. Dry by leaving fabrics
in the shade.
N DESCRIPTION
53 canopy fabric
54 canopy frame (optional)
55 Rocking base
56 Backrest adjusting
mechanism
14 "u" shaped rear bar
15 Rear leg plastic cover
16 Rear wheel plastic cap
17 complete rear wheels
17a inner tube
18 Rear brake mechanism
19 Fabric seat unit
20 Footrest plastic cap
21 seat unit
22 seat unit net
23 Button to adjust footrest
24 Footmuff
25 Fabric hood
N DESCRIPTION
57 Quicky system mechanism
58 Backrest
59 Backrest adjuster
26 Plastic hood adjuster
27 canopy frame
28 Bumper bar
29 Bag
30 seat unit handle
31 Naked chassis
32 metal plate with washers
1 instruction manual
2 Basket
3 5 point harness
4 Rain cover
28