Storage; Disposal And The Environment; Telescopic Arm As An Accessory; Assembling The Telescopic Arm - Grizzly Tools AGS 108-2 Lion Traducción Del Manual De Instrucciones Original

GB
We are not liable for damage caused by
the use of the unit if the original cause
was improper repair or the use of non-
original parts or through use other than
that designated in this manual.

Storage

• Keep the equipment in the blade
guard supplied, dry and out of reach of
children.
• Store the battery only in a partially
charged state. The state of charge
should be 40 – 60 % over a longer
storage period.
• Store the equipment between 10 °C
and 25 °C. During storage, avoid ex-
treme cold or heat so the battery does
not lose power.
• During a longer storage period, check
the state of charge of the battery and
recharge if necessary roughly every
3 months.
Disposal and the
environment
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Machines do not belong with do-
mestic waste.
Do not dispose of the device
with the battery installed in
household waste, fire (risk of
explosion) or water. Damaged
batteries may damage the
environment and your health if
toxic fumes or liquids leak out.
82
• Dispose of the equipment with the
battery discharged. Do not open the
equipment or the battery.
• Dispose of the equipment in accord-
ance with the local regulations. Take
the equipment to a collection point,
where it will be recycled in an environ-
mentally friendly manner. For informa-
tion about this, ask your local waste
management company or our service
centre.
• Defective units returned to us will be
disposed of for free.
• Place cut branches in compost and
not in the dustbin.
Telescopic arm as an
accessory
Ensure that the battery (
removed before carrying out any
work.
Assembling the telescopic
arm
Putting the telescopic arm
together:
1. Put both parts of the telescopic
arm (18) together and tighten
the screw.
Make sure that the cable is not
clamped.
Assembling/dismantling the
telescopic arm:
2. Push the device along the guide
rail (19) into the equipment
holder (20) of the telescopic
arm. The plug connection (21)
engages audibly into the charg-
ing socket (5a).
3. To dismantle, pull the device out
of the holder (20) with moderate
force.
7) is