Scheppach Basato 4 Traducción De La Instrucción De Original página 15

Fault
Motor does not start
Saw blade is not
running straight
Burn marks appear
on the wood during
the cutting work
Saw blade jams
during cutting work
16 english
Trouble shooting
Possible cause
a) No power
b) Switch, Condenser
c) Electrical extension cord is defective
a) Guide has been wrongly set
b) Wrong saw blade
a) Blunt saw blade
b) Wrong saw blade
a) Blunt saw blade
b) Deposits on the saw blade
c) Guide has been set poorly
Solution
a) Check mains connection
b) Have them checked by an electrical
engineer
c) Remove the plug from the socket, check
it, and replace if necessary
a) Set the saw blade guide according to
the operating instructions
b) Select a saw blade according to the
operating instructions
a) Change the saw blade
b) Select a saw blade according to the
operating instructions
a) Change the saw blade
b) Clean the saw blade
c) Set the saw blade guide according to
the operating instructions