1800 X 643 X 1048; Motor V/Hz; P1 Kw; Safety Notes - Scheppach Basato 4 Traducción De La Instrucción De Original

Manufacturer
Scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We wish you much pleasure and success with your new
scheppach machine.
Note
In accordance with valid product liability laws, the manu-
facturer of this device shall not be responsible for damage
to and from this device which results from:
• Improper care.
• Noncompliance with the Operating Instructions.
• Repairs made by unauthorized persons.
• The installation and use of any parts which are not origi-
nal scheppach replacement parts.
• Improper use and application.
• Failure the electrical system as a result of noncompli-
ance with the legal and applicable electrical directives
and VDE regulations 0100, DIN 57113 / VDE 0113.
We recommend
that you read through the entire operating instructions be-
fore putting into operation.
These operating instructions are to assist you in getting to
know your machine and utilize its proper applications.
The operating instructions contain important notes on how
you work with the machine safely, expertly, and economi-
cally, and how you can avoid hazards, save repair costs,
reduce downtime and increase the reliability and service
life of the machine.
In addition to the safety requirements contained in these
operating instructions, you must be careful to observe your
countryís applicable regulations.
The operating instructions must always be near the ma-
chine. Put them in a plastic folder to protect them from
dirt and humidity. They must be read by every operator
before beginning work and observed conscientiously. Only
persons who have been trained in the use of the machine
and have been informed of the various dangers may work
with the machine. The required minimum age must be ob-
served.
In addition to the safety requirements contained in these
operating instructions and your countryís applicable reg-
ulations, you should observe the generally recognized
technical rules concerning the operation of woodworking
machines.

General notes

• After unpacking, check all parts for any transport dam-
age. Inform the supplier immediately of any faults.
• Later complaints cannot be considered.
• Make sure the delivery is complete.
• Before putting into operation, familiarize yourself with
the machine by carefully reading these instructions.
• Use only original scheppach accessories, wearing or re-
placement parts. You can find replacement parts at your
scheppach dealer.
• When ordering, include our item number and the type
and year of construction of the machine.
10 english
Basato 4
Lieferumfang
Guide profile with adjustment knob
Hexagonal wrench SW 10/13
Offset hexagon bar key SW 3/SW 5
Technische Daten
Passage width mm
Passage height mm
Table size mm
Cutting speed m/min.
Saw band length mm
Saw band
width mm
Height up to tabletop
mm
H x W x D mm
Slewing range of the
table°
Overall weight kg
Suction connection
ø mm
Band wheel ø mm
Antrieb
230–240/50

Motor V/Hz

Aufnahmeleistung

P1 kW

Abgabeleistung P2
kW
Betriebsart
1500
Drehzahl
Motorschutz
Unterspannungs-
auslösung
Schuko
Stecker
Subject to technical modifications!
m In these operating instructions we have marked the
places that have to do with your safety with this sign.
m

Safety notes

• Please pass on safety notes and instructions to all those
who work on this machine.
Personnel entrusted with work on the machine must
have read the operating instructions and in particular
the chapter on safety before beginning work. Reading
the instructions after work has begun, is too late. This
applies especially to persons working only occasionally
on the rnachine, e.g. during setting up or rnaintenance.
• Observe all safety instructions and warnings attached to
the machine.
• See to it that all safty instructions and warnings attached
to the machine are complete and perfectly legible.
• Check all power supply lines. Do not use defective
lines.
• Make sure that the machine stands stable on firm
ground.
Band saw
Saw bench
Parallel guide rail
Operating instructions
Adapter for suction
Push stick
Accessories bag
Cross-section gauge
Transport handle
Base
375
250
400 x 548
800/1200
2895
6/30
1010

1800 x 643 x 1048

-17° – +45°
108
100
380
400/50
1,5 1,5
1,1 1,1
S1 S1
1500
yes yes
yes yes
CEE