Uline H-8224 Instrucciones De Montaje página 5

15. Align hinge (H) with holes in door (8). Use two
M4 x 17.5 mm screws to secure. Repeat for
remaining hinges. (See Figure 11)
16. Align handle (F) with holes in door (8). Use two
M4 x 22 mm screws to secure. Repeat for remaining
handle. (See Figure 11)
Figure 11
8
Left Door
17. Align S-bracket from lock set (G) with holes in left
door (8). Use two M3 x 14 mm screws (I) to secure.
(See Figure 12)
18. Align lock set (G) with holes in right door (9). Use two
M3 x 14 mm screws (I) to secure. (See Figure 12)
Figure 12
8
Left Door
PAGE 5 OF 15
ASSEMBLY CONTINUED
+
Hinge Assembly
H
9
Right Door
I
G
G
9
Right Door
19. Stick one plastic bumper (K) to bottom inside corner
of each door. (See Figure 13)
20. With second person, hold door to align hinges (H)
with holes in side panel (4). Use four M4 x 17.5 mm
screws to secure. Repeat for remaining door and
hinges. (See Figure 13)
Figure 13
F
21. Once door panels are attached, each hinge may
need to be adjusted to align the doors. To adjust the
depth of the doors, tighten or loosen the rear screw
in the hinge. To adjust the angle of the doors,
tighten or loosen the center screw in the hinge.
(See Figure 14)
Figure 14
22. Replace top drawer in each pedestal file.
NOTE: Storage cabinet top from H-6859 carton
will remain unused. Please discard.
1-800-295-5510
uline.com
4
Tighten
Side
Panel
Door
Door Depth
K
H
Side
Panel
Door
Door Angle
1121 IH-8224