Installing Media; Using An Sd Card; Using An Ssd - Blackmagic Design Cinema Camera Manual Del Usuario

Installing Media

8
Inserting an SD card into the Blackmagic Pocket
Cinema Camera.
Inserting an SSD into the Blackmagic Cinema Camera
and the Blackmagic Production Camera 4K.
Installing Media

Using an SD Card

If your camera uses an SD card for recording clips, you can insert an SDXC or SDHC card. To insert
an SD card in Blackmagic Pocket Cinema Camera:
Step 1. On the under side of the camera, push the door release towards the lens to access the
battery terminal.
Step 2. With the gold contacts on the SD card facing towards the lens, insert the SD card until
you feel it lock into place. Push on the SD card to release it.
Step 3. Close the door to the battery terminal and slide the door release to the right to lock it.
Step 4. Power on the camera. The status strip will display a moving dot while the camera checks
the SD card and then it will say 'ready'.
The supplied SD card is for software installation only and not suitable for video recording. You'll find
a list of recommended SD cards on page 14.

Using an SSD

If your camera uses an SSD to record clips, you can insert a 2.5" 9.5 mm SSD formatted in either
the HFS+ or exFAT file systems. To insert an SSD into Blackmagic Cinema Camera and Blackmagic
Production Camera 4K:
Step 1. Open the SSD door on the right hand side of the camera.
Step 2. With the gold SATA contacts facing towards the camera door, insert the SSD until you feel
it press into place. Close the SSD door.
Step 3.
Power on the camera. The status strip will display a moving dot while the camera checks
the SSD and then it will say 'ready'
You'll find a list of recommended SSDs on page 12.