Servicing The Pressure Equipment - Prebena DRUCKLUFT MOBILO Manual Del Usuario

Servicing the pressure equipment

The pressure equipment may only be serviced by persons with the
required knowledge, skills and experience. All work not described
here must be carried out by the manufacturer's aftersales service or
at the manufacturer.
Cleaning housing and external surfaces
Slight soiling
Wipe off the pressure equipment housing with a dry cloth.
Oil all metal parts of the pressure equipment thinly with
PREBENA special nailer oil.
Severe soiling
Wipe off the pressure equipment housing with a cloth dampened
slightly with a mild soap solution.
Then wipe off the housing with a cloth dampened slightly with tap
water.
Finally wipe the housing dry with a soft, dry cloth.
Oil all metal parts of the pressure equipment thinly with
PREBENA special nailer oil.
CAUTION
Unsuitable cleaning agents can cause damage
to the pressure equipment or the accessories.
Clean only with a dry or slightly damp cloth
or a cloth dampened with a mild soap
solution.
Servicing the pressure equipment
27