Connecting Pressure Equipment To The Compressed Air Supply - Prebena DRUCKLUFT MOBILO Manual Del Usuario

Connecting pressure equipment to the compressed
air supply
The pressure equipment is connected to a compressed air cartridge
(included in the scope of delivery).
The admissible working pressure of the pressure equipment is 10
bar. If the admissible operating pressure is exceeded, the dial on the
pressure gauge (6.) for the operating pressure moves into the red
range.
This can occur under the following conditions:
If both safety valves are defective and
you have connected the pressure equipment to an unsuitable
compressed air cartridge.
Attach compressed air cartridge
Screw the stoppers (8.) out of the connecting threads for the
compressed-air cartridge.
WARNING
Risk of explosion if the maximum operating
pressure is exceeded.
If this happens, immediately disconnect the
compressed air supply from the pressure
equipment.
Preparing the pressure equipment
15