Prebena PKT-8-PR100 Traducción Del Manual Del Usuario Original página 109

Display of operating states
The tool may indicate the following operating states:
Lighting behavior of
the red LED/signal
tone
Not lit
Lit continuously; tool
beeps at 1-second
interval
Flashes at 0.5-second
interval
Flashes at 1-second
interval
Operating state
The tool is ready for operation.
The battery charge is too low. The
tool switches off after 10 seconds.
The operating temperature is too
high. The tool switches off after
10 seconds.
Control malfunction. The tool
switches off after 10 seconds.
Description
29