Prebena PKT-8-PR100 Traducción Del Manual Del Usuario Original página 148

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 162
Eliminating malfunctions
Feature
The red LED
in the
control
panel is lit
continuously
and the tool
beeps at a
1-second
interval.
The red LED
in the
control
panel is lit at
a 0.5-
second
interval.
68
Possible cause
Operating
pressure is too
low.
The driving in
process is not
performed
completely.
The battery
charge is too
low. The tool
switches off
after
10 seconds.
The operating
temperature is
too high. The
tool switches off
after
10 seconds.
Remedy
▶ Add more compressed air from the
cartridge (see page 32).
▶ Contact Customer Service (see
page 75).
▶ Charge the battery.
▶ Allow the tool to cool off for at least 15–
30 minutes.
▶ Check whether the exhaust air opening
and air intake opening are free.
▶ Clean them if necessary.

Publicidad

Tabla de contenido
loading

Tabla de contenido