Safety; Proper Use - Prebena PKT-8-PR100 Traducción Del Manual Del Usuario Original

Safety

Failure to comply with the safety instructions in this operating manual
may lead to serious accidents with severe or even fatal injuries.
▶ Make note of and follow all warnings and notices in this operating
manual and on the fastener driving tool while working with the
fastener driving tool.

Proper use

The fastener driving tools described here are hand-guided, motor-
powered hybrid power tools. They are used to drive nails into wood
materials with strength C30 in accordance with EN 338 and a
maximum bulk density of 460 kg/m³.
Use of the fastener driving tool on other materials is only permitted
after consultation with the manufacturer.
The allowable nail types are:
• RKP: Round head nail, in paper-tape nail strip
• PR: Half head nail, in paper-tape nail strip
The tool is also able to process round head nail type RK with
plastic-tape nail strips.
Observing safety requirements
Proper use also includes:
• complying with accident prevention regulations and the
requirements and standards in force at the operation site,
• observing and following all the instructions specified in this
operating manual, especially the safety instructions.
Safety
9