Publicidad
Step 9
Carefully turn your unit over onto its front edges. Unfold the BACK (G)
å
and lay it over your unit.
Fasten the top edge of the BACK (G) to your unit using thirteen BLACK
å
9/16" LARGE HEAD SCREWS (1S). Fasten the remaining BACK (G) to
your unit using the NAILS (1N).
NOTE: Be sure to tap NAILS into the holes that line up over
å
the UPRIGHTS (C and D).
NOTE: Perforations have been provided for access through the
å
BACK. Carefully cut out the holes needed.
Fasten the ADJUSTABLE FEET (34E) to the BOTTOM (NN). Use eight
å
BLACK 9/16" LARGE HEAD SCREWS (1S).
NOTE: Adjustments to the ADJUSTABLE FEET will be made
å
in Step 10 once your unit is standing upright.
BLACK 9/16" LARGE HEAD SCREW
(21 used in this step)
www.sauder.com/services
These holes must line
up over the UPRIGHTS.
1S
Caution
Do not stand the unit upright without the
BACK fastened. The unit may collapse.
Cut-out (used for lifting)
G
NN
403680
1N
NAIL
(33 used in this step)
34E
1S
Page 13
Publicidad
